Rave Bag Aka Pa in a Back Pack [sRc]

by gav2142 in Circuits > Audio

4735 Views, 16 Favorites, 0 Comments

Rave Bag Aka Pa in a Back Pack [sRc]

C:\Documents and Settings\gav\My Documents\My Pictures\the rave bag.jpg
this is how to make a bag with a mini pa amp and 2 book shelf speakers in a back pack

Moding the Amp

C:\Documents and Settings\gav\My Documents\My Pictures\step down place.jpg
C:\Documents and Settings\gav\My Documents\My Pictures\the step down.jpg
if u dont have a amp that takes 12v or a battery powered amp then you will want to take the 240 volt step down out of the amp so it will run of 12v.

The Battery Used

C:\Documents and Settings\gav\My Documents\My Pictures\D2 - SV_A0089_0001.jpg
www.maplins.co.uki used a yuasa 12v battery u can get these from www.maplins.co.uk i would recomend this battery as it has lasted nealy 3days so far with no change in volume on the amp

this battery is £21 but i got mine out of the house alarm for free (Y)

The Speakers

you can use book shelf speakers

i would recomend them as they have the wooden box and the sound is very good from them

i used some amstrad 30w speakers and tey work very well and go very loud


they do the job with amazing results

The Audio Lead

C:\Documents and Settings\gav\My Documents\My Pictures\SP_A0727.jpg
C:\Documents and Settings\gav\My Documents\My Pictures\eeek.jpg
u can use 2 types of leads for the input
1. a guitar lead with a plug in jack to convert it into a smaller conection for mp3 players

2. a phono aux lead for hifis with the small jack (headphone conection) on the other side

sorry i dont know what they are called lol

Time 4 a Rave

a little video of it just to show it in action (Y) made this project in 30 mins so its not perfect
enloy hope u like it :D x